2017 Chevrolet Silverado 1500 Lights Problems

While driving the vehicle during nighttime hours the dashlights and navigation screen will turn to daylight mode which then makes the truck headlights turn off (when in auto mod) and the navigation screen is too bright and distracts you when driving. The dash lights and navigation screen will randomly switch between daytime and night time mode when driving.

The truck has inadequate peripheral illumination while driving on dark winding roads. .when making turns you cannot see the the road in front of the truck. When going straight its difficult to see the shoulder depth of the road.

While utilizing the high beam function of the projection lighting shake or rattle when traveling over bumps on the road causing a flickering affect of the lights. I have had the entire headlight assembly replaced and the defect is still present. I have driven two 2017 and one 2018 silverado pickups and the defect was also present.

At night, when shifting into reverse gear and the backup cameras is activated, the system changes the center dashboard display screen from night brightness to full daytime brightness. If looking at the screen when this happens, night vision is lost by the glare. If not looking and in a dark area, it becomes impossible to see much of anything other than the display screen.

When you put the truck in reverse, the rear back up camera display is always extremely bright, regardless of the setting of the dimmer switch or automatic dimmer settings. This causes a safety issue at night when backing up, as the driver's night vision is completely diminished as soon as you put the truck in reverse.

When driving low speeds stabilitrac appears on screen and truck wants to turn off,display screen and gauges flicker.

At night when shift car into reverse the camera display in the dash is so bright it blinds the driver, and there is no adjustment

Headlights are not very good at all. I have adjusted them and then other drivers bright light me. I've tried everything to be able to see better at night but nothing has worked for me.

Backup camera too bright for backiup at night while still needing to view side mirrors. It would be great to come up with a sliding "on screen" brightness control for immediate control over the backup camera on screen brightness. Way too bright for safety / still needing to view side mirrors.

Back up camera on in dash display is extremely bright at night. There is no way for the driver to adjust the brightness. It is so bright that you can not see anything else and can't even see the screen because it is so bright!

The backup camera is blinding at night. Cannot safely drive vehicle at night. There is no dimming the screen.

2017 chevrolet silverado 1500 when the vehicle is shifted into reverse (while stopped, from either park or neutral) the backup camera view appears on the display screen. The issue is when it is dark outside, the display is so bright that it blinds the driver. I am unable to see out of the windows or mirrors.

The light for the backup camera is extremely bright and blinding at night. It blocks up your view of the camera and must be covered with a towel in order to see when backing at night. I spoke with general motors and was told that there is no fix.

Radio/navigation display is a 8" touch screen similar to display found on a tablet. This screen is used to display the rear camera when vehicle is placed in reverse. At night time when truck is placed in reverse the the display is so bright I can not see out of any of the side windows...to use my mirrors or see if any objects are near.